Getting To Know MORE About The Guitar

I don’t really think it is Unrealistic to know something about the guitar if you are serious about learning how to play it. Who knows, maybe someday you will be Passionate enough to want to build your own…but until then, that is a totally separate topic, and we really want to concentrate on learning the different parts of a guitar.

So, without further ado – let’s take a look at the different parts of a guitar.

Parts of a Guitar Diagram

It is easy enough to explain certain parts of a guitar, and even detail the explanation of each different part. BUT, like they say, “A Picture Is Worth A Thousand Words


Diagram of a Guitar

Just above here, you will see the picture of a Standard guitar. The parts are identified so you can see where each part is, and what they actually look like. I will give you a brief explanation of each part below:




                           acoustic guitar body 2           acoustic guitar body 5              acoustic guitar body 4

Notice the different body shapes and designs. There are literally 100’s, for the purpose of this post, I have only shown you some. You can see more here –          guitar body images – Bing images

The parts of the body of the guitar are not that complicated. I have listed them below:

Parts Of The Body

BRIDGE – let’s start at the bottom and work our way up. Now, seeing the guitar is shown laying on its right side, the furthest left is actually the bottom. So the bridge helps support the strings on the guitar. When the strings vibrate, the sound produced is transferred to another area of the guitar – in this case the sound hole, where it is slightly amplified and transferred into the air. This is where the sound increases in volume and rings out. That is another discussion

BRIDGE SADDLE – now let’s look at the bridge saddle. This is simply the part of the bridge that physically supports the strings. An acoustic guitar like shown, and an electric guitar, may have different saddles. For instance, an acoustic guitar generally has one saddle, but, an electric guitar could have as many as one for each string, or some other combination to accommodate all the strings. The main thing to understand here is, the strings run OVER the bridge saddle, and are supported there.

BODY TOP – many guitar enthusiasts, and Luthiers alike, consider the guitar top the dominant factor in the quality of sound the guitar produces. The guitar top is very thin, and engineered to create a high quality sound. Of course the better the engineering, and the better the wood used, will determine the over-all sound, and in most cases, fluctuations in Prices.

SOUND HOLE – also known as the “Sound Chamber” – is always located on the body top, under the strings, in a specific location.




            acoustic guitar neck 4                     acoustic guitar neck 1                        acoustic guitar neck 2


Just like the bodies, there are many types of neck designs as well. Let’s just focus on the neck itself. The guitar neck is the long, slender piece protruding from the guitar body. There are a few different parts to    the neck itself that you should be familiar with: you can see more here:

guitar neck images – Bing images

Parts Of The Neck                                                               

FINGER BOARD – also known as the “Fret board” is the long, thin piece of material mounted on the neck of the guitar. The strings run over this Fingerboard between the Nut and the Bridge.

NECK – the neck of the guitar is the long narrow piece protruding from the body of the guitar. This is where the fret board and head stock are attached.

FRETS – these are the spaces on the fret board starting near the top of the neck at the Nut, continuing on up the fret board to the Body of the guitar.

POSITION MARKERS – are usually single dots on certain frets to help remind you of the count of the frets. Usually they are placed on the 3rd, 5th, 7th, and 9th frets. There are usually 2 at the 12th, and 24th frets. Tuning keys dots, or “Inlays” as some call them, can be other variations as well. Like small blocks, or dots near the top of the fret board rather than in the middle, or even some fancy icon. The bottom line is, they are mainly there to help you identify the fret numbers.

FRET BARS – these are the metal bars that go from top to bottom along the neck, separating the frets. If a string is depressed between these bars, sounds are made known as notes.


acoustic guitar headstock 6                                                                                       acoustic guitar headstock 5


Once again we can see there are many different designs of headstocks as well. Hopefully the images will give you an idea of just what  is available to the guitarist. The Head Stock is the piece at the top of the neck that holds the Tuning Keys. The Nut, separates the headstock from the neck. Technically, I guess you could say that the nut is a part of the neck, but, it does help guide the strings into the tuners, so, for simplicity, I have included it as part of the Head Stock. Want to see more?? Check this out

guitar headstock images – Bing images

Parts Of The Headstock

  1. NUT – the nut can be found at the top of the fret board where the neck meets the head stock. The nut is usually made of bone, or plastic bone and has grooves in it to hold the strings in place. They also help guide the strings toward the proper guitar tuning keys.
  2. TUNING KEYS – the tuning keys are located on the head stock of the guitar. They are used to wind your strings up to a certain pitch or note. tuning keys keys can be used to tighten or loosen the strings on a guitar, hence, changing the tone of the string.
  3. HEAD STOCK – the head stock is the very top of the guitar attached to the neck. This part of the guitar houses the tuning keys where the strings are attached.



I have mentioned the Most important parts of a guitar. The parts that you should know a little about. How they work, or why they are there, can only be a benefit to you down the road. There are other parts to a guitar that are not as important, But you do not need to concern yourself with them in order to learn how to play.

Should you choose to build or repair guitars, than you will certainly want to learn a lot more about each of these parts. How can they be made, or acquired, or how you can upgrade them? There are also a lot of other things that you will need to learn about. The electric guitar, for instance, has some specifications that will need your attention, in order to become well versed.

However; for the purpose of this Article, I simply wanted to share the most common parts of a guitar, in case you ever have the need to know about them, Or, you may even need to purchase one of the parts for a guitar. Having a little knowledge about the instrument, can certainly help your Journey to become a Guitar Owner, and a player.

It is my hope that this Article can help those of you who may think a guitar is too complicated to learn about. For the Beginner, a guitar can be very intimidating, but I hope this helps to eliminate any of those fears.

If you would like to see a few different guitars, Try here


Some pages on this site may contain links to “Featured” or “Recommended” products. Should you click those links and go to view the item in question, I may receive a small commission if you decide to purchase. FULL DISCLOSURE HERE!

Take all the confusion and frustration out of learning guitar. Try This

Please be sure to leave me a brief comment below.

Here’s to your Success, and continued Interest into an Amazing instrument.

Until Next Time – Keep On Rockin’ ??


Leave a Comment